Breakaway Super Sinker Wizard
If your a Do-It Yourselfer and what to save money or need different size weights use the Wizard Kit to make up to 10 of your own sinkers with rotating wires. All you need is a thru-hole egg sinker that clears all wires and pin. To make the assembly job go easier we recommend having the following tools; bench vise, HD wire cutters, hammer, and plastic mallet. * Once assembled don't take apart!

Egg sinkers must be purchased separately. The Water Gremlin EG2 (4oz) Egg Sinker is the ONLY recommended egg sinker to use. Egg sinker must not be too small or too large. Too Small and the sinker will set too deep into the black retainer and not allow the yellow nose cone to be “locked-down”. Too Large and rotating wires will not lock into the black retainer nor will the wires rotate. The egg sinker to be used must have a through hole big enough for the split pin to fit through. Most egg sinkers won’t work unless the existing sinker hole is enlarged by drilling. Refer to directions enclosed with the Breakaway Wizard Kit for additional information.

The Wizard kit contains:
10 - Plastic Retainer Rings
10 - Stainless Center Pins
10 - Stainless Washers
20 - Stainless Rotating Wires
10 - Plastic Nose Cones